The Subaru U0416 Code is a diagnostic trouble code that can be found in most Subaru vehicles and indicates an issue with the CAN communication system. To help the mechanic troubleshoot and diagnose the issue, this article will discuss the code definition, description, causes, and related service bulletins. The Subaru U0416 code is not an easy problem to fix, as it can be caused by several different factors, including wiring harnesses, defective fuses, battery voltage, and incompatible settings in the body integrated unit or ECM. With this in mind, let us take a closer look at the causes and solutions associated with the Subaru U0416 code.
Causes and Solutions for Subaru U0416 Code
| Cause | Solution |
|---|---|
| No battery voltage | Replace the battery or correct the voltage as required |
| Defective fuse | Replace the fuse |
| Wiring harness or coupling needs repair | Check the wiring harness and coupling for signs of damage and repair as needed |
| Incompatible setting in the body integrated unit or ECM | Check the settings of the body integrated unit or ECM and reconfigure as necessary |
No Battery Voltage
The Subaru U0416 code can be caused by no battery voltage. This can range from a simple battery replacement to a more complicated rewiring of the electrical system. In order to determine if the battery voltage is the cause of the issue, a mechanic needs to measure the voltage of the battery using a digital multimeter. If the voltage is lower than the recommended voltage, the battery needs to be replaced and the electrical system needs to be rewired to ensure the correct voltage is supplied to the CAN communication system.
Defective Fuse
The Subaru U0416 code can also be caused by a defective fuse in the CAN communication system. This can be a tricky issue to resolve, as the fuse may be difficult to locate. A mechanic needs to identify which fuse is responsible for the CAN communication system and then inspect the fuse for signs of damage. If the fuse is damaged, it needs to be replaced with a new fuse of the same rating and type.
Wiring Harness or Coupling Needs Repair
The Subaru U0416 code can also be caused by a wiring harness or coupling that needs repair. This can be a difficult problem to identify, as the wiring harness may be hidden or difficult to access. A mechanic needs to inspect the wiring harness and coupling for signs of damage. If any damage is found, the damaged wires need to be replaced and the wiring harness and coupling need to be connected properly.
Incompatible Setting in the Body Integrated Unit or ECM
The Subaru U0416 code can also be caused by an incompatible setting in the body integrated unit or ECM. This can be a frustrating issue to resolve, as the settings of the body integrated unit or ECM can be difficult to access. A mechanic needs to check the settings of the body integrated unit or ECM and reconfigure them as necessary.
Conclusion
When it comes to diagnosing and fixing the Subaru U0416 code, it is important to remember that the code can be caused by several different factors, including no battery voltage, a defective fuse, a wiring harness or coupling that needs repair, or an incompatible setting in the body integrated unit or ECM. In order to properly diagnose and fix the Subaru U0416 code, a mechanic needs to take the necessary steps to identify and repair the cause of the issue. By following these steps, a mechanic can successfully diagnose and repair the Subaru U0416 code and ensure the CAN communication system is functioning properly.
https://www.youtube.com/watch?v=nkkSz83LeTk