When a car’s electronic control unit (ECU) functionality is incorrect, it could be due to the MINI P1698 Code. This code is set when the car’s GIB (Gearbox Interface Box), a system dedicated to low level control of the transmission control unit, detects an internal error in the ECU. It is important for car owners to be aware of the potential causes and solutions for this code as it can lead to a range of issues if left unresolved. To help with this, a table of causes and solutions is provided below.
Causes and Solutions to MINI P1698 Code
| Causes | Solutions |
|---|---|
| Short to battery | Check the battery voltage and replace if necessary |
| Short to ground | Inspect the wiring harness and the connectors for shorts to ground |
| Open circuit | Repair or replace the wiring harness and connectors |
| CAN data bus wires have short circuited to each other | Check the CAN data bus wires for any shorts to each other |
| ECU has failed | Replace the ECU |
| BUS system failure | Check the data bus lines for any open circuits |
| Defective bus controller (EGS) | Replace the bus control module |
Short to Battery
When the MINI P1698 Code is set, it is important to first check the battery voltage. If the voltage is too low, it can cause an issue with the ECU as it will not be able to properly regulate the power to the system. This can lead to the code being set and the car experiencing issues such as stalling and poor engine performance. To remedy this, the battery should be replaced if the voltage is too low.
Short to Ground
When the ECU is not functioning correctly, it may be due to a short to ground. This is when the wiring harness and connectors are not properly insulated and are not up to the required safety standards. This can cause the ECU to malfunction, leading to the MINI P1698 Code being set. To fix this issue, the wiring harness and connectors should be inspected for any shorts to ground and repaired or replaced if necessary.
Open Circuit
An open circuit is when the wiring harness and connectors have been damaged or have become loose. This can cause the ECU to be unable to properly regulate the power to the system, leading to the MINI P1698 Code being set. To fix this issue, the wiring harness and connectors should be repaired or replaced if necessary.
CAN Data Bus Wires
The CAN data bus wires are responsible for sending and receiving information to and from the ECU. If these wires have short circuited to each other, it can cause the ECU to malfunction and the MINI P1698 Code to be set. To fix this issue, the CAN data bus wires should be checked for any shorts to each other and repaired or replaced if necessary.
ECU Failure
In some cases, the ECU may have failed completely and will need to be replaced. This can cause the MINI P1698 Code to be set and can lead to a range of issues such as stalling and poor engine performance. To fix this issue, the ECU should be replaced with a new one.
BUS System Failure
The BUS system is responsible for controlling the data bus lines. If this system fails, it can cause the MINI P1698 Code to be set. To fix this issue, the data bus lines should be checked for any open circuits and repaired or replaced if necessary.
Defective Bus Controller (EGS)
The bus controller (EGS) is responsible for controlling the data bus lines. If this system fails, it can cause the MINI P1698 Code to be set. To fix this issue, the bus controller should be replaced with a new one.
Conclusion
When the MINI P1698 Code is set, it is important to be aware of the potential causes and solutions. There are a variety of potential causes ranging from short circuits to battery voltage issues. Solutions include inspecting the wiring harness and connectors, replacing the ECU, and checking the data bus lines for any open circuits. By understanding the potential causes and solutions for the MINI P1698 Code, car owners can ensure that the issue is resolved quickly and efficiently.
https://www.youtube.com/watch?v=RVzSE8lBv1I