Are you experiencing Honda P2184 Code? This code is related to a problem with the engine coolant temperature (ECT) sensor 2 circuit, and it can be a serious issue if not addressed properly. Honda P2184 Code is a result of a voltage reading of 0.08 V or less for at least two seconds. The code is usually triggered by poor connections or loose terminals at ECT sensor 2 and the PCM, as well as a “short” in the wire between ECT sensor 2 and the PCM. Other possible causes can be a faulty ECT sensor 2, a PCM that may need to be updated with the latest software, or a faulty PCM.
Causes and Solutions of Honda P2184 Code
| Cause | Solution |
|---|---|
| Poor connections or loose terminals at ECT sensor 2 and the PCM | Check for any loose connections and tighten them if needed |
| “Short” in the wire between ECT sensor 2 and the PCM | Replace any damaged wiring |
| Faulty ECT sensor 2 | Replace the faulty sensor |
| PCM may need to be updated with the latest software | Update the PCM software |
| Faulty PCM | Replace the faulty PCM |
Poor Connections or Loose Terminals at ECT Sensor 2 and the PCM
If Honda P2184 Code is present, it is likely that the connections or terminals at the Engine Coolant Temperature (ECT) sensor 2 and the Powertrain Control Module (PCM) are loose or disconnected. This can be verified by checking the connections for any signs of looseness or corrosion. If loose connections or terminals are found, they must be tightened or replaced to restore proper operation.
“Short” in the Wire Between ECT Sensor 2 and the PCM
Honda P2184 Code can also be caused by a “short” in the wiring between the ECT sensor 2 and the PCM. This can be identified by using a scan tool to read the voltage readings of the various circuits. If a short is present, the wiring must be replaced to ensure proper operation.
Faulty ECT Sensor 2
If Honda P2184 Code is triggered, it is possible that the ECT sensor 2 itself is faulty. This can be verified by testing the sensor with a scan tool. If the sensor is found to be faulty, it must be replaced to restore proper operation.
PCM May Need to Be Updated With the Latest Software
In some cases, the PCM may need to be updated with the latest software in order to address the Honda P2184 Code. This can be done by downloading and installing the latest software version from the manufacturer.
Faulty PCM
In rare cases, the PCM itself may be faulty and need to be replaced. If this is the case, the faulty PCM must be replaced to restore proper operation.
Conclusion: Solving the Honda P2184 Code
The Honda P2184 Code can be triggered by a variety of causes, such as poor connections or loose terminals at ECT sensor 2 and the PCM, a “short” in the wire between ECT sensor 2 and the PCM, a faulty ECT sensor 2, a PCM that may need to be updated with the latest software, or a faulty PCM. In order to ensure proper operation, any of these causes should be addressed as soon as possible. Solving the Honda P2184 Code can be done by following the solutions provided in the article, such as checking for loose connections and replacing any faulty parts.
https://www.youtube.com/watch?v=KYBmnUWE6kA