The Ford P064F Code is a diagnostic trouble code (DTC) that indicates unauthorized software or calibration has been detected in the powertrain control module (PCM). This code is generally caused by aftermarket accessories, performance modifications or PCM programming errors. As a result, it is important to take the proper steps to diagnose and repair this issue in order to ensure that the vehicle is functioning properly. Fortunately, this is a relatively simple process, and this article will provide an overview of the causes, solutions and steps needed to fix the Ford P064F Code.
Causes and Solutions for Ford P064F Code
| Cause | Solution |
|---|---|
| Aftermarket accessories | Reprogram the vehicle identification (VID) block (use as built data) |
| Performance modifications | Check for other DTCs or drive symptoms for further action |
| PCM programming error | Make sure to check for aftermarket performance products before installing a new PCM |
| Unauthorized Software/Calibration Detected | Reprogram or update the calibration |
Aftermarket Accessories
When a Ford P064F Code is triggered, the most common cause is aftermarket accessories. These can cause the PCM to detect unauthorized Software or calibration, and as a result the code is triggered. The solution to this issue is to reprogram the vehicle identification (VID) block using the factory as-built data. This will help to ensure that the code is cleared and the vehicle is functioning properly.
Performance Modifications
The Ford P064F Code can also be triggered by performance modifications, such as those that increase engine power or alter the fuel or spark timing. In this case, the solution is to check for other diagnostic trouble codes (DTCs) and drive symptoms to determine the best course of action.
PCM Programming Error
An issue with the PCM programming can also cause the Ford P064F Code. If this is the case, it is important to check for aftermarket performance products before installing a new PCM. If the products are present, they should be removed before installing the new PCM.
Unauthorized Software/Calibration Detected
If the Ford P064F Code is triggered because of unauthorized software or calibration, the solution is to reprogram or update the calibration. This will ensure that the PCM is functioning properly and that the code is cleared.
Conclusion
In conclusion, the Ford P064F Code is a diagnostic trouble code (DTC) that indicates unauthorized software or calibration has been detected in the powertrain control module (PCM). This code is generally caused by aftermarket accessories, performance modifications or PCM programming errors. Fortunately, this is a relatively simple process, and the solutions to this issue involve reprogramming the vehicle identification (VID) block, checking for other DTCs or drive symptoms and making sure to check for aftermarket performance products before installing a new PCM. By taking the proper steps to diagnose and repair this issue, you can ensure that your Ford P064F Code is cleared and the vehicle is functioning properly.
https://www.youtube.com/watch?v=4G-0mQOEVWI