Dodge P1416 Code

The Dodge P1416 Code is a common fault code that is found in many Dodge models. This code indicates a problem in the Cylinder 6 Reactivation Control Performance. It is caused when power is supplied to each Multi Displacement Solenoid (MDS) when the engine is making a transition from 8 cylinder mode to 4 cylinder mode. This issue can be caused by a number of things, such as a MDS Solenoid 6 Control being shorted to voltage, oil passages being restricted, a lifter being at fault, a MDS Solenoid 6 malfunctioning, or a Powertrain Control Module (PCM) being bad. It is important to understand the causes of this code, as well as the potential solutions, in order to address the issue correctly.

Causes and Solutions for Dodge P1416 Code

Cause Solution
MDS Solenoid 6 Control Shorted to Voltage Replace the MDS Solenoid 6 Control
Oil Passages Restricted Clean and unclog the oil passages
Lifter Replace the faulty lifter
MDS Solenoid 6 Replace the MDS Solenoid 6
Powertrain Control Module (PCM) Replace the PCM

MDS Solenoid 6 Control Shorted to Voltage

When a Dodge P1416 code is triggered, it is often due to the Multi Displacement Solenoid (MDS) 6 Control being shorted to voltage. This can occur when the power is supplied to the MDS Solenoid 6 Control when the engine is transitioning from 8 cylinder mode to 4 cylinder mode. If this is the cause of the code, then the only solution is to replace the MDS Solenoid 6 Control.

Oil Passages Restricted

Another potential cause of the Dodge P1416 code is a restricted oil passage. This can occur when the oil passages become clogged, which prevents the oil from flowing freely. In this case, the solution is to clean and unclog the oil passages.

See also  Dodge P06DD Code

Lifter

A faulty lifter can also cause the Dodge P1416 code to be triggered. If this is the case, then the lifter needs to be replaced in order to resolve the issue.

MDS Solenoid 6

In some cases, the cause of the Dodge P1416 code is a malfunctioning MDS Solenoid 6. If this is the case, then the MDS Solenoid 6 needs to be replaced in order to resolve the issue.

Powertrain Control Module (PCM)

The final cause of the Dodge P1416 code is a bad Powertrain Control Module (PCM). If this is the case, then the only solution is to replace the PCM.

Conclusion

The Dodge P1416 Code is a common fault code found in many Dodge models. It is caused by a number of issues, such as a MDS Solenoid 6 Control being shorted to voltage, oil passages being restricted, a lifter being at fault, a MDS Solenoid 6 malfunctioning, or a Powertrain Control Module (PCM) being bad. The solutions for this code involve replacing the MDS Solenoid 6 Control, cleaning and unclogging the oil passages, replacing the faulty lifter, replacing the MDS Solenoid 6, or replacing the PCM. To prevent this issue from occurring, it is important to regularly inspect and maintain Dodge P1416 Code components.

https://www.youtube.com/watch?v=3Wn04lNycx0

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top