Chrysler P2299 Code

Being able to diagnose and repair a Chrysler P2299 Code error is important for any car owner. This code is generated when the Powertrain Control Module (PCM) detects a brake application with the APP Sensor showing a fixed pedal opening, temporary or permanent. The code can be caused by a variety of reasons including customer pressing accelerator and brake pedal simultaneously, accelerator pedal stuck on or brake switch out of adjustment, brake switch, or APP Sensor. In this article, we will provide a table of causes and solutions related to the Chrysler P2299 Code.

Causes and Solutions for Chrysler P2299 Code

Cause Solution
Customer pressing accelerator and brake pedal simultaneously Ensure that only the brake pedal is being pressed
Accelerator pedal stuck on or brake switch out of adjustment Check the accelerator pedal and brake switch and adjust as needed
Brake switch Replace the brake switch if needed
APP Sensor Replace the APP Sensor if needed

Customer Pressing Accelerator and Brake Pedal Simultaneously

When diagnosing the Chrysler P2299 Code, it is important to first determine if the customer is pressing the accelerator and brake pedals at the same time. If so, the customer should be advised to only press the brake pedal when braking. This will help to eliminate the code from being set.

Accelerator Pedal Stuck on or Brake Switch Out of Adjustment

If the customer is not pressing the accelerator and brake pedals at the same time, the next step is to inspect the accelerator pedal and brake switch. If the accelerator pedal is stuck on or the brake switch is out of adjustment, it will cause the code to be set. If either of these issues is present, the accelerator pedal and brake switch must be adjusted as needed.

See also  Chrysler U0100 Code

Brake Switch

If the accelerator pedal and brake switch are functioning properly, the next step is to inspect the brake switch. If the brake switch is faulty, it must be replaced in order to prevent the code from being set.

APP Sensor

The last step is to inspect the APP Sensor. If the APP Sensor is faulty, it must be replaced in order to prevent the code from being set.

Conclusion

In conclusion, diagnosing and repairing a Chrysler P2299 Code error can be a complicated process. It is important to first determine if the customer is pressing the accelerator and brake pedals simultaneously. If not, the accelerator pedal and brake switch must be inspected and adjusted as needed. If the brake switch is faulty, it must be replaced. Lastly, if the APP Sensor is faulty, it must be replaced. With the right knowledge and tools, diagnosing and repairing the Chrysler P2299 Code can be done quickly and easily.

https://www.youtube.com/watch?v=i5dWGi8_BO4

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top