When your vehicle’s code reader shows the Chevrolet U2105 code, it means that the Transmission Control Module (TCM) has detected an error on the CAN Link. This code may be seen when the components are powered, ignition voltage is between 9 and 18 volts, and the engine speed is between 200 and 7,500 RPM for 5 seconds. This code can be caused by a variety of issues, including poor electrical connections at the TCM, such as bent terminals, backed-out terminals, damaged terminals, poor terminal tension, chafed wire, and broken wire inside the insulation. To solve this problem, it is important to understand the root cause and address it accordingly.
Chevrolet U2105 Code Causes and Solutions
| Causes | Solutions |
|---|---|
| Bent Terminals | Inspect and straighten the terminals |
| Backed-Out Terminals | Tighten the terminals |
| Damaged Terminals | Replace the damaged terminals |
| Poor Terminal Tension | Check the terminal tension and adjust accordingly |
| Chafed Wire | Replace the damaged wire |
| Broken Wire Inside the Insulation | Replace the insulated wire |
When troubleshooting a Chevrolet vehicle displaying the code U2105, it is important to identify and address the cause of the issue. If the code signals that the Transmission Control Module (TCM) has detected an error on the CAN Link, it is likely due to poor electrical connections at the TCM. This could include bent terminals, backed-out terminals, damaged terminals, poor terminal tension, chafed wire, and broken wire inside the insulation. To resolve this, it is important to inspect the wiring and take the appropriate steps to fix the issue. In the table below, you can find a list of the potential causes of the Chevrolet U2105 code, along with solutions for each.
Bent Terminals
When the terminals of the TCM are bent, it can cause the code U2105 to be displayed on the reader. To fix this issue, you should inspect the terminals and straighten them out accordingly.
Backed-Out Terminals
If the terminals of the TCM are backed-out, it can also lead to the U2105 code being displayed. To rectify this, you should tighten the terminals.
Damaged Terminals
If the terminals of the TCM are damaged, it can cause the code U2105 to appear. To solve this problem, you should replace the damaged terminals.
Poor Terminal Tension
If the terminal tension of the TCM is poor, it can lead to the code U2105 being displayed. To solve this issue, you should check the terminal tension and adjust it accordingly.
Chafed Wire
When a wire inside the TCM is chafed, it can cause the code U2105 to appear on the reader. To fix this problem, you should replace the damaged wire.
Broken Wire Inside the Insulation
When a wire inside the insulation of the TCM is broken, it can cause the code U2105 to be displayed. To solve this problem, you should replace the insulated wire.
Conclusion
When the code reader displays the Chevrolet U2105 code, it means that the TCM has detected an error on the CAN Link. To solve this issue, it is important to identify the root cause and address it accordingly. This could include bent terminals, backed-out terminals, damaged terminals, poor terminal tension, chafed wire, and broken wire inside the insulation. To fix these issues, it is important to inspect the wiring and take the appropriate steps to resolve the Chevrolet U2105 Code.
https://www.youtube.com/watch?v=9M87pC00nIg