Having Chevrolet P11DB Code can be an annoying and worrying experience for car owners. It is important to be aware of what it is, the causes and possible solutions in order to tackle it. P11DB is a code related to the NOx Sensor 1 Current Performance meaning the exhaust temperature sensor 2 is greater than 95°C (203° F), the engine speed is greater than 600 RPM, the battery voltage is greater than 11 V and the DPF regeneration is not active. The code can be caused by P11DB or P11DC, or it may be that the ECM receives a serial data message from the NOx Sensor Module that the NOx ratio of valid to invalid feedback is greater than a predetermined amount for greater than 5s.
Causes and Solutions for Chevrolet P11DB Code
| Cause | Solution |
|---|---|
| P11DB or P11DC | Replacing the faulty parts and resetting the code. |
| ECM receives a serial data message from the NOx Sensor Module that the NOx ratio of valid to invalid feedback is greater than a predetermined amount for greater than 5s. | Checking the wiring and connections. |
| Exhaust temperature sensor 2 is greater than 95°C (203° F) | Replacing the exhaust temperature sensor. |
| Engine speed is greater than 600 RPM | Checking for any issues with the engine. |
P11DB or P11DC
The P11DB or P11DC code can be caused by faulty parts, such as the NOx Sensor Module or the fuel injector, which should be replaced. After the faulty parts have been replaced, the code must be reset, which can be done by disconnecting the battery for a few minutes.
ECM Receives a Serial Data Message from the NOx Sensor Module
When the ECM receives a serial data message from the NOx Sensor Module that the NOx ratio of valid to invalid feedback is greater than a predetermined amount for greater than 5s, the cause of the P11DB code must be identified and corrected. This may involve checking the wiring and connections between the NOx Sensor Module and the ECM.
Exhaust Temperature Sensor 2 is Greater than 95°C (203° F)
If the exhaust temperature sensor 2 is greater than 95°C (203° F), then the exhaust temperature sensor must be replaced. It is important to ensure that the new sensor is properly calibrated to the engine and that the code is reset after the installation.
Engine Speed is Greater than 600 RPM
When the engine speed is greater than 600 RPM, it is important to check for any issues with the engine, such as a faulty fuel injector or a worn out spark plug. If any of these issues are identified, they must be repaired or replaced before resetting the code.
Conclusion
The Chevrolet P11DB Code can be an annoying and worrying experience for car owners, but it is important to be aware of the causes and possible solutions in order to tackle it. There are several causes of the code, such as P11DB or P11DC, a serial data message from the NOx Sensor Module, an exhaust temperature sensor 2 that is greater than 95°C (203° F), or an engine speed that is greater than 600 RPM. In each case, there are specific solutions that can be implemented to address the issue, such as replacing faulty parts, checking wiring and connections, replacing the exhaust temperature sensor, and checking for any issues with the engine. By following these steps, car owners can successfully address the Chevrolet P11DB Code and get back on the road.
https://www.youtube.com/watch?v=YgXbvkmPEGk