The Chevrolet C0035 0F Code is an error code that signals a problem with the Left Front Wheel Speed Sensor Circuit. This code is indicated when a short to ground is detected on the wheel speed 12 V reference or signal circuit, a short to voltage or an open is detected on 12 V reference or signal circuit, or an erratic signal output of the wheel speed sensor is detected three times in 200 milliseconds. In order to identify the underlying cause of the code and to address the issue, it is important to understand what the code means and the possible causes and solutions associated with it.
Causes and Solutions of Chevrolet C0035 0F Code
| Cause | Solution |
| A short to ground is detected on the wheel speed 12 V reference or signal circuit. | Check the sensor wiring and connections for loose, broken, or corroded wiring. |
| A short to voltage, or an open is detected on 12 V reference or the signal circuit. | Replace the sensor if the wiring and connections are intact. |
| An erratic signal output of the wheel speed sensor is detected 3 times in 200 milliseconds. | Check the wheel speed sensor for signs of damage and replace it if necessary. |
| The EBCM detects a change in wheel speed that exceeds 20 km/h (12 mph) between two 10 millisecond wheel speed samples. | Remove any debris or obstructions from the wheel speed sensor and inspect the sensor for any damage. |
Short to Ground Detection
The Chevrolet C0035 0F Code is an error code that is triggered when a short to ground is detected on the wheel speed 12 V reference or signal circuit. When this happens, the ECM is unable to detect the wheel speed accurately, leading to an erratic signal output. It is important to check the sensor wiring and connections for any loose, broken, or corroded wiring. If the wiring is in good condition, the sensor needs to be replaced.
Short to Voltage or Open Detection
When a short to voltage or open is detected on the 12 V reference or signal circuit, the Chevrolet C0035 0F Code is triggered. In this situation, it is recommended to check the connections and wiring again and replace the sensor if everything is intact. If the wiring or connections are damaged, they need to be repaired before replacing the sensor.
Erratic Signal Output Detection
The Chevrolet C0035 0F Code is indicated when the wheel speed sensor produces an erratic signal output three times in 200 milliseconds. In this situation, it is important to inspect the wheel speed sensor for any signs of damage and replace it if necessary. It is also important to remove any debris or obstructions from the wheel speed sensor and inspect the sensor for any damage.
Change in Wheel Speed Detection
The Chevrolet C0035 0F Code is also triggered when the ECM detects a change in wheel speed that exceeds 20 km/h (12 mph) between two 10 millisecond wheel speed samples. When this happens, it is advisable to inspect the wheel speed sensor for any damage, remove any debris or obstructions, and replace the sensor if necessary.
Conclusion
The Chevrolet C0035 0F Code is an error code that signals a problem with the Left Front Wheel Speed Sensor Circuit. In order to identify the underlying cause of the code and to address the issue, it is important to understand the possible causes and solutions associated with it. The Chevrolet C0035 0F Code can be caused by a short to ground on the wheel speed 12 V reference or signal circuit, a short to voltage or an open on 12 V reference or signal circuit, an erratic signal output of the wheel speed sensor detected three times in 200 milliseconds, or a change in wheel speed that exceeds 20 km/h (12 mph) between two 10 millisecond wheel speed samples. The solutions for each of these causes are to check the wiring and connections for any loose, broken, or corroded wiring; replace the sensor if the wiring and connections are intact; check the wheel speed sensor for signs of damage and replace it if necessary; and remove any debris or obstructions from the wheel speed sensor and inspect the sensor for any damage.
https://www.youtube.com/watch?v=2dJqk443s-w