When it comes to Volvo vehicles, the ECM-P011622 code is a warning that something is wrong with the engine coolant temperature circuit. This code is triggered when the engine control module (ECM) detects that the value from the engine temperature sensor deviates too much from the intake temperature, outside temperature or fuel temperature after the …
The Volvo ECM-P017100 code is a diagnostic trouble code (DTC) that is designed to inform the driver of an issue with the engine control module (ECM) in their Volvo model. This code is triggered when the ECM detects a deviation from the target lambda in the fuel/air mix. The ECM then registers this as an …
Having a Volvo REM-8D12 Code can be a source of worry for any Volvo owner. This code is typically a signifier of a problem with the high level stop lamp, and can be diagnosed at key position II. However, it is important to understand the underlying cause of the code before attempting to diagnose or …
Understanding the cause and solution to an ECM-P001400 Code can be a daunting task for Volvo owners. The ECM-P001400 Code is an Exhaust Camshaft Position Timing – Over-Advanced (Bank 1) code, and the engine control module (ECM) controls the position of the camshaft (angle). The engine control module (ECM) checks that the requested position is …
The ECM-P044200 code is a diagnostic trouble code (DTC) related to the Volvo vehicle’s Evaporative Emission System. This code is triggered when the engine control module (ECM) detects a small leak in the fuel system, typically between 0.5 mm and 1.0 mm. This code can be diagnosed by performing a leakage diagnosis, and identifying the …
When it comes to Volvo vehicles, there are a variety of diagnostic trouble codes that can be generated. One of the most common codes is the Volvo ECM-85 code, which is associated with the engine cooling fan (FC) low-speed signal being too high or too low. This code can cause various issues in the car …
The Volvo TCM-000F code is a diagnostic trouble code (DTC) stored in the transmission control module (TCM) when the control module registers that there is no current in the solenoid STH circuit. This code indicates that the Line Pressure Solenoid STH is not functioning correctly and needs to be addressed. Line pressure solenoid STH is …
When checking a Volvo vehicle for an ECM-P018000 code, it is important to understand the definition, description, cause and solution of the issue. The ECM-P018000 code stands for Fuel Temperature Sensor A Circuit, which is measured by the engine control module (ECM). To check for this code, the control module must measure the direct voltage …
