When it comes to diagnosing and repairing Cadillac vehicles, one of the most common issues is the P0442 code, which stands for “Evaporative Emission (EVAP) System Small Leak Detected.” This code can be triggered by a variety of issues, such as a faulty fuel system, a leak in the EVAP system, or a problem with the engine control module. To identify and repair the underlying cause of the code, it is important to understand the related service bulletins and the possible causes and solutions. A thorough diagnosis is essential in order to ensure the problem is fixed and the engine runs optimally. In this article, we will discuss the Cadillac P0442 code and provide information on the causes, solutions, and related service bulletins.
Causes and Solutions for Cadillac P0442 Code
| Cause | Solution |
|---|---|
| Control Module detects a leak in the EVAP system | Check for faulty fuel system components |
| Control Module must complete several EONV tests before diagnostic can turn the MIL ON or OFF | Run the EONV test and inspect the results |
| Ignition 1 voltage between 10-16 volts | Check the ignition system for damage or malfunctioning components |
| Barometric pressure (BARO) is greater than 74 kPa | Ensure the BARO is within the specified range |
Control Module Detects a Leak in the EVAP System
When the Control Module detects a leak in the EVAP system, it can cause the Cadillac P0442 code to be triggered. To determine if this is the cause of the code, the fuel system must be checked for faulty components. If any components are found to be damaged or malfunctioning, they must be replaced or repaired. Additionally, the EVAP system must be inspected for any leaks.
Control Module Must Complete Several EONV Tests
The Control Module must also complete several EONV tests before the diagnostic can turn the MIL (Malfunction Indicator Light) ON or OFF. If the Control Module fails to complete these tests, the Cadillac P0442 code could be triggered. To fix this issue, the EONV tests must be run and the results must be inspected for any errors.
Ignition 1 Voltage Between 10-16 Volts
When the Ignition 1 voltage is between 10-16 volts, it can also cause the Cadillac P0442 code to be triggered. To determine if this is the cause of the code, the ignition system must be checked for any damage or malfunctioning components. If any components are found to be damaged, they must be replaced or repaired.
Barometric Pressure (BARO) is Greater Than 74 kPa
The BARO (Barometric Pressure) must be within the specified range in order to prevent the Cadillac P0442 code from being triggered. If the BARO is greater than 74 kPa, the code could be triggered and must be addressed. To fix this issue, the BARO must be checked and adjusted as necessary.
Conclusion: Fixing the Cadillac P0442 Code
The Cadillac P0442 code can be triggered by a variety of issues, such as a faulty fuel system, a leak in the EVAP system, or a problem with the engine control module. To identify and repair the underlying cause of the code, it is important to understand the related service bulletins and the possible causes and solutions. A thorough diagnosis is essential in order to ensure the problem is fixed and the engine runs optimally. By following the causes and solutions outlined in this article, the Cadillac P0442 code can be fixed.
https://www.youtube.com/watch?v=u3pfH-slq1Q