If your BMW vehicle is displaying the P0208 code, it means the engine has detected a malfunction in the cylinder 8 injector circuit. The engine’s computer, known as the Digital Motor Electronics (DME), senses an irregularity in the fuel injector “8” control circuit when it should have been low or high, when it should have been low or high. This could be due to a fault in the wiring harness, a damaged injector, or a short or open circuit in the control circuit. To diagnose the cause of the P0208 code, one must first check the battery voltage, which should be between 9.5 and 17. Common causes for this code include an injector 8 connector that is damaged, open or shorted, or an injector 8 control circuit that is open, shorted to ground or power.
Causes and Solutions of BMW P0208 Code
| Cause | Solution |
|---|---|
| Injector 8 connector is damaged, open or shorted | Check and replace the injector 8 connector |
| Injector 8 control circuit is open, shorted to ground or to power | Test and replace the injector 8 control circuit |
| Battery voltage is less than 9.5 or more than 17 | Recharge the battery or replace it with a new one |
| Damage in the wiring harness | Check the wiring harness and repair or replace the damaged parts |
If your BMW vehicle is displaying the P0208 code, it means that the engine has identified an issue with the cylinder 8 injector circuit. The computer of the engine, the Digital Motor Electronics (DME), senses an irregularity in the fuel injector “8” control circuit when it should have been high or low. This could be caused by problems in the wiring harness, a damaged injector, or a short or open circuit in the control circuit. To diagnose the code, the first step is to check the battery voltage, which should be in the range of 9.5 to 17. Some of the most common causes for this code include an injector 8 connector that is damaged, open or shorted, or an injector 8 control circuit that is open, shorted to ground or power.
Check and Replace the Injector 8 Connector
If the code P0208 is caused by the injector 8 connector being damaged, open or shorted, the first step is to check the injector 8 connector. If the connector is found to be damaged, open or shorted, it should be replaced with a new one.
Test and Replace the Injector 8 Control Circuit
If the P0208 code is caused by the injector 8 control circuit being open, shorted to ground or power, the next step is to test the injector 8 control circuit. If the test reveals that the control circuit is open, shorted to ground or power, it needs to be replaced with a new one.
Recharge or Replace the Battery
If the code P0208 is caused by the battery voltage being less than 9.5 or more than 17, the next step is to recharge the battery or replace it with a new one.
Check and Repair the Wiring Harness
If the code P0208 is caused by a damage in the wiring harness, the first step is to check the wiring harness and repair or replace the damaged parts.
Conclusion
The BMW P0208 code is triggered when the engine’s computer, the Digital Motor Electronics (DME), detects an irregularity in the fuel injector “8” control circuit. The causes and solutions for this code include an injector 8 connector that is damaged, open or shorted, an injector 8 control circuit that is open, shorted to ground or power, a battery voltage that is less than 9.5 or more than 17, and a damage in the wiring harness. To diagnose and fix this issue, one must check and replace the injector 8 connector, test and replace the injector 8 control circuit, recharge or replace the battery, and check and repair the wiring harness. Fixing the BMW P0208 code requires an accurate diagnosis and an understanding of the causes and solutions for this code.
https://www.youtube.com/watch?v=sdqGnWcrlPA