The Jeep P0733 Code is a diagnostic trouble code (DTC) that is triggered when the Transmission Control Module (TCM) detects that the actual gear ratio is outside of the minimum and maximum calibrated gear ratio values. This code is a common issue and can be caused by LOW FLUID LEVEL, INPUT OR OUTPUT SPEED SENSOR NOT OPERATING CORRECTLY, CLUTCH B- SLIPPING, CLUTCH C- SLIPPING, CLUTCH E- SLIPPING, VALVE BODY – STICKING SOLENOIDS, or an issue with the TRANSMISSION. If your Jeep is displaying this code, it is important to take action and understand the causes and potential solutions for the problem.
Causes and Solutions for Jeep P0733 Code
| Cause | Solution |
|---|---|
| LOW FLUID LEVEL | Check the fluid level and fill to the correct level. |
| INPUT OR OUTPUT SPEED SENSOR NOT OPERATING CORRECTLY | Replace the faulty sensor. |
| CLUTCH B- SLIPPING | Replace the faulty clutch. |
| CLUTCH C- SLIPPING | Replace the faulty clutch. |
| CLUTCH E- SLIPPING | Replace the faulty clutch. |
| VALVE BODY – STICKING SOLENOIDS | Replace the faulty solenoid. |
| TRANSMISSION | Replace the faulty transmission. |
If you own a Jeep, you may have experienced the dreaded P0733 code. This code is triggered when the Transmission Control Module (TCM) detects that the actual gear ratio is outside of the minimum and maximum calibrated gear ratio values. While this code is common, it is important to take action when it appears to prevent further damage to your vehicle. This article will discuss the potential causes and solutions for the Jeep P0733 code. We will start by discussing the potential causes and then move on to the potential solutions. Understanding the causes and solutions of this code will help you take the appropriate action to fix the problem and get your Jeep back on the road.
Low Fluid Level
One of the causes of the Jeep P0733 code is a low fluid level. If the fluid level is too low, the transmission may not be able to shift properly and this can trigger the code. The best way to check the fluid level is to use a dipstick. If the fluid level is low, simply fill it to the correct level.
Input or Output Speed Sensor Not Operating Correctly
Another cause of the Jeep P0733 code is an input or output speed sensor that is not operating correctly. If the sensor is not working properly, the transmission may not be able to shift properly and this can trigger the code. The best way to check the sensor is to use a diagnostic scanner. If the sensor is faulty, it will need to be replaced.
Clutch B, C, and E Slipping
The Jeep P0733 code can also be caused by slipping clutches. If the clutches are slipping, the transmission may not be able to shift properly and this can trigger the code. The best way to check the clutches is to use a diagnostic scanner. If the clutches are slipping, they will need to be replaced.
Valve Body Sticking Solenoids
The Jeep P0733 code can also be caused by sticking solenoids in the valve body. If the solenoids are sticking, the transmission may not be able to shift properly and this can trigger the code. The best way to check the solenoids is to use a diagnostic scanner. If the solenoids are sticking, they will need to be replaced.
Transmission
The last potential cause of the Jeep P0733 code is a faulty transmission. If the transmission is faulty, it will need to be replaced.
Conclusion
The Jeep P0733 code is a common issue and can be caused by many different things. It is important to take action and understand the causes and potential solutions for the problem. In this article, we discussed the potential causes and solutions for the Jeep P0733 code. We discussed low fluid level, input or output speed sensor not operating correctly, clutch B, C, and E slipping, valve body sticking solenoids, and a faulty transmission. By understanding the causes and solutions for this code, you can take the appropriate action to fix the problem and get your Jeep P0733 Code fixed.
https://www.youtube.com/watch?v=5mbwE4EnDso