When a Chevrolet B1001 46 Code appears in a vehicle’s diagnostic system, it is an indication that there is an option configuration error. This code is triggered when the battery voltage is between 9-16 volts and the vehicle’s data link communications operate normally. Although this code is not indicative of any type of damage or malfunction, it is important to diagnose the cause of the error to prevent potential problems from arising in the future. This article will discuss the causes and solutions of the B1001 46 Code, with a focus on the Calibration / Parameter Memory Failure sub-type.
Causes and Solutions of Chevrolet B1001 46 Code
| Cause | Solution |
|---|---|
| Control module not configured properly | Update the control module to the correct configuration |
| Calibration/Parameter Memory Failure | Install the correct calibration/parameter memory |
| Data link communication issue | Check for any loose or damaged wiring and replace if necessary |
| Battery voltage too low | Recharge or replace the battery |
Control Module Not Configured Properly
The B1001 46 Code is often triggered when the control module is not set up with the correct configuration. This can be caused by a variety of issues, such as incorrect installation of the control module or a software issue. The best way to fix this issue is to update the control module to the correct configuration.
Calibration/Parameter Memory Failure
When the B1001 46 Code is triggered because of a calibration/parameter memory failure, the best way to resolve the issue is to install the correct calibration/parameter memory. This can usually be done by using a scan tool or an OBD-II reader.
Data Link Communication Issue
The B1001 46 Code can also be triggered by a data link communication issue. This can be caused by a variety of issues, such as a faulty wiring harness or a broken connection. To fix this issue, it is important to check for any loose or damaged wiring and replace if necessary.
Battery Voltage Too Low
The B1001 46 Code can also be triggered when the battery voltage is too low. This can be caused by a variety of issues, such as a faulty battery or a faulty alternator. To fix this issue, it is important to recharge or replace the battery.
Conclusion
In conclusion, the Chevrolet B1001 46 Code is an indication that there is an option configuration error. While this code is not indicative of any type of damage or malfunction, it is important to diagnose the cause of the error to prevent potential problems from arising in the future. The most common causes of the Chevrolet B1001 46 Code are a control module not configured properly, a calibration/parameter memory failure, a data link communication issue, and a battery voltage too low. To fix these issues, it is important to update the control module to the correct configuration, install the correct calibration/parameter memory, check for any loose or damaged wiring and replace if necessary, and recharge or replace the battery.
https://www.youtube.com/watch?v=OAXKCArs6Ng